MTM Series Trapezium Mill

The Raymond mill is a classic mill from the past. And most modern mills come from it, and the MTM series milling machine is the most successful one. Optimized the internal structure and a large number of core devices. For example, a new booster unit can greatly increase production capacity. And the split plow is easy to replace, and the cost of spare parts and downtime are significantly reduced. According to feedback from hundreds of customers, MTM series pulverizers perform quite well in producing 60-325 mesh powders. Through word of mouth, this milling machine is quite popular in many countries.

Materials: Limestone, Feldspar, Calcite, Talc, Barite, Dolomite, Kaolin, Gypsum, Graphite

limestone

Cost advantage

After the grinding roller and the grinding ring are worn to a certain extent, by adjusting the length of the compression spring, a constant grinding pressure can be maintained between the grinding roller and the grinding ring, which improves the utilization rate of the grinding roller ring and saves the grinding force. Material costs and production remained stable.

Creative Rolls and Rings

The grinding roller assembly is connected by a horizontal tie rod and a spring, which exerts radial force to protect the main shaft and the bearing from the impact of large materials in the grinding chamber, thereby prolonging the service life of the grinding roller. equipment. The combined action of the high pressure spring and centrifugal force guarantees a close contact between the grinding roller and the grinding ring. The rolling force is 1.2 times that of the Raymond mill under the same conditions, and the production capacity is greatly improved.

Efficient Balanced Compression Spring

The main mill and the powder separator are combined with braided connection. Damping springs and sealing tape are used to reduce vibration and noise and avoid resonance.

environmental protection

A variety of dust removal equipment is available, and the emission standard is higher than the national standard.


0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published.